Device Setup; Connecting The Artromot®-E2/-E2 Compact, Performance Check - ORMED.DJO ARTROMOT-E2 Manual De Operación

4. Device setup

Note: See device description on pages
2/3 and 268/269.
4.1 Connecting the
ARTROMOT®-E2/-E2 compact,
performance check
1. Connect the power cord to socket (18)
of the device and connect the mains
plug to a wall outlet with a non-fused
earthed wire (100 to 240 Volt, 50/60 Hz).
2. Turn the power switch (19) on.
3. Follow these steps to set the carriage to
the home position:
Initial adjustment for new patients
Write the patient's name down on the back
of the chip card. Insert the original patient
chip card (17) into the programming unit
(15).
Press the MENU key on the programming
unit seven times in rapid succession or
give it one long press to access program-
ming level seven (with each key press, you
advance one level).
Press the "new patient" parameter key
and select this function (a check
mark appears in the circle next to the
function).
Press the START key. The CPM device auto-
matically enters the home position.
Adjustment with
programmed chip card
Insert the original patient chip card (17)
into the programming unit (15).
Press the START key.
The CPM device automatically moves to
the starting position (middle position of
the set extension/flexion and pronation/su-
pination values).
Performance check
If the programming unit can be operated
as described above and the
ARTROMOT®-E2/-E2 compact moves to the
home position (for home position values,
please refer to sections 5.3), the CPM de-
vice has passed the performance check.
The device also runs performance checks
regularly during operation. This is what
happens, if a problem is identified:
− An audio signal sounds.
− The device switches off immediately.
− The message "ERROR" and an error code
(e.g. ERROR 5) appear on the display.
In this situation, you may attempt to
restart the device by turning it briefly
off and on again with the power switch.
If the error message persists, have the
device inspected by a Service technician,
before using it again.
If it has been determined that the
ARTROMOT®-E2/-E2 compact operates
perfectly, ask the patient to sit down on the
ARTROMOT®-E2/-E2 compact chair.
60