ORMED.DJO ARTROMOT-E2 Manual De Operación página 59

m Warning!
Equipment malfunction—
− Magnetic and electrical fields are
capable of interfering with the proper
performance of the device. For this
reason make sure that all external
devices operated in the vicinity of the
CPM device comply with the relevant
EMC requirements. X-ray equip-
ment, MRI devices, radio systems, cell
phones, etc. are possible sources of
interference as they may emit higher
levels of electromagnetic radiation.
Keep the CPM device away from these
devices and verify its performance
before use.
− Refer repair and maintenance to
authorized persons.
− Route all cables such that they will
not get caught by the moving parts
during operation and that they do not
present a stumbling hazard.
− Inspect the
ARTROMOT®-E2/-E2 compact for dam-
age and loose connections at least
once a year.
m Caution!
Preventing chafing and pressure sores
— If your patient is adipose, very tall or
very short, be sure to prevent chafing
and pressure sores.
Patient hazard, damage to the
CPM device — The CPM device
ARTROMOT®-E2 must not be used to
transport people.
m Caution!
Equipment damage—
− Check that the voltage and frequency
ratings of your local power line are
those indicated on the nameplate.
− The seat withstands a maximum
continuous loadof 150 kg / 330 lb.
− The arm support element with-
stands a maximum continuous load
of 9 kg / 20 lb.
− Do not allow any objects (such as
blankets, cushions, or cables) to get
caught in the moving parts of the
CPM device.
− Do not expose the
ARTROMOT®-E2/-E2 compact to direct
sunlight, because some of the com-
ponents may reach inadmissibly high
temperatures.
− Be aware that the connectors can only
be inserted in the correct orientation
and secure all connections with the
locks.
59