ORMED.DJO ARTROMOT-E2 Manual De Operación página 72

LEVEL 5:
n Stretching in extension
With the special "stretching in exten-
sion" function the joint will be gently
stretched (arm stretching movement).
Only the extension/flexion movement
is treated here. Motor B is automatically
disabled. The position of motor B cannot
be changed once this special function
has been activated.
Starting at the middle position the
carriage will first move to the pro-
grammed flexion limit and then to the
programmed extension limit.
Subsequently the carriage reverses 5 °
towards flexion and then moves very
slowly back to the programmed exten-
sion value (symbol:
the carriage attempts to attain another 5
° at an even slower speed (symbol:
If a high resistance toward the additional
5 ° is sensed, the reverse on load func-
tion is automatically activated and the
carriage moves in the opposite direction.
This stretch cycle is repeated ten times.
After that the carriage moves to the
programmed flexion limit and restarts
the stretching in extension cycle.
This sequence can be repeated
as often as needed. You can stop
treatment with the STOP key; after the
programmed therapy duration, it will
stop automatically.
Default: disabled
). Subsequently
).
72
Note!
• If a pause has been programmed, the
carriage will stop for the pause each
time the maximum stretching value is
attained.
• Enabling the stretching in extension
function automatically disables motor
B. The only movement performed is
extension/flexion.
• It is not possible to combine a second
stretching function with the special
function "stretching in extension".
• During operation, the display will
show the symbol
left-hand corner.
n Stretching in flexion
With the special "stretching in flex-
ion" function the joint will be gently
stretched (arm bending movement).
Only the extension/flexion movement
is treated here. Motor B is automatically
disabled. The position of motor B cannot
be changed once this special function
has been activated.
Starting at the middle position the car-
riage will first move to the programmed
extension limit and then to the pro-
grammed flexion limit.
Subsequently the carriage reverses 5 °
towards extension and then moves very
slowly back to the programmed flexion
value (symbol: ). Then the carriage
attempts to attain another 5 ° at an even
slower speed (symbol:
If a high resistance toward the additional
5 ° is sensed, the reverse on load func-
tion is automatically activated and the
carriage moves in the opposite direction.
This stretch cycle is repeated ten times.
After that the carriage moves to the pro-
grammed extension limit and restarts
the stretching in flexion cycle.
This sequence can be repeated
as often as needed. You can stop
treatment with the STOP key; after the
programmed therapy duration, it will
stop automatically.
Default: disabled
in the upper,
).