ORMED.DJO ARTROMOT-E2 Manual De Operación página 73

Note!
• If a pause has been programmed, the
carriage will stop for the pause each
time the maximum stretching value is
attained.
• Enabling the stretching in flexion
function automatically disables motor
B. The only movement performed is
extension/flexion.
• It is not possible to combine a second
stretching function with the special
function "stretching in extension".
• During operation, the display will
show the symbol
left-hand corner.
n Stretching in pronation
With the special "stretching in prona-
tion" function the joint will be gently
stretched in the pronation direction.
Only the pronation/supination move-
ment is treated here. Motor A is auto-
matically disabled. The position of motor
A cannot be changed once this special
function has been activated.
Starting at the middle position the car-
riage will first move to the programmed
supination position and then to the
programmed pronation position.
Subsequently the carriage reverses 5 °
towards supination and then moves very
slowly back to the programmed prona-
tion value (symbol:
the carriage attempts to attain another 5
° at an even slower speed (symbol:
If a high resistance toward the additional
5 ° is sensed, the reverse on load func-
tion is automatically activated and the
carriage moves in the opposite direction.
This stretch cycle is repeated ten times.
After that the carriage moves to the pro-
grammed maximum supination position
and restarts the stretching in pronation
cycle.
This sequence can be repeated as often
as needed. You can stop treatment
with the STOP key; after the pro-
grammed therapy duration, it will stop
automatically.
Default: disabled
in the upper,
). Subsequently
).
73
Note!
• If a pause has been programmed, the
carriage will stop for the pause each
time the maximum stretching value is
attained.
• Enabling the stretching in pronation
function automatically disables motor
A. The only movement performed is
pronation/supination.
• It is not possible to combine a second
stretching function with the special
function "stretching in pronation".
• During operation, the display will
show the symbol
left-hand corner.
n Stretching in supination
With the special "stretching in supina-
tion" function the joint will be gently
stretched in the supination direction.
Only the pronation/supination move-
ment is treated here. Motor A is auto-
matically disabled. The position of motor
A cannot be changed once this special
function has been activated.
Starting at the middle position the car-
riage will first move to the programmed
pronation position and then to the
programmed supination position.
Subsequently the carriage reverses 5 °
towards pronation and then moves very
slowly back to the programmed supina-
tion value (symbol:
the carriage attempts to attain another 5
° at an even slower speed (symbol:
If a high resistance toward the additional
5 ° is sensed, the reverse on load func-
tion is automatically activated and the
carriage moves in the opposite direction.
This stretch cycle is repeated ten times.
After that the carriage moves to the pro-
grammed maximum pronation position
and restarts the stretching in supination
cycle.
This sequence can be repeated as often
as needed. You can stop treatment
with the STOP key; after the pro-
grammed therapy duration, it will stop
automatically.
Default: disabled
in the upper,
). Subsequently
).