Description Of The Artromot®-E2/-E2 Compact; Description Of The Artromot®-E2 Device Components - ORMED.DJO ARTROMOT-E2 Manual De Operación

2. Description of the ARTROMOT®-E2/-E2 compact
The motorized CPM device supports the
following movements of the elbow joint:
Extension/flexion
Pronation/supination 90° - 0° - 90°
It can be reconfigured for use on either
side.
Note!
To unambiguously represent the current
position of the CPM device, pronation
and extension values below 0° are
marked with the symbol "-" both on the
display and in this document.
These are some of the outstanding
ARTROMOT®-E2/-E2 compact features:
− anatomically correct setup
− physiological movements
− maximum possible ranges of motion
− programming unit for precise adjust-
ment of patient-specific therapy values
− chip card for storage of the programmed
therapy parameters
− easy transport
Biocompatibility
Those parts of the
ARTROMOT®-E2/-E2 compact that come
into contact with the patient when the
device is used as intended, are designed to
fulfil the biocompatibility requirements of
the applicable standards.
2.1 Description of the
ARTROMOT®-E2 device
components
Note: See device description on pages
2 and 3
1. Knob for horizontal adduction/abduc-
tion (horizontal extension/flexion)
2. Screw for double joint
5° - 0° - 140°
50
3. Double joint
4. Screw for height adjustment
5. Upper arm support
6. Locking pin for height adjustment of
upper arm support
7. Screw for elbow angle adjustment
8. Cam lever for forearm length
adjustment
9. Slider
10. Screw for adjustment of the backrest
angle
11. Pin for swivel motion of upper arm
support
12. Screw for forearm module swivel
motion
13. Locking screw for right/left positioning
14. Armrest for healthy arm
15. Programming unit
16. Compartment for storage of program-
ming unit
17. Patient chip card
18. Connection for power cord
19. Power switch (ON/OFF)
20. Fuse
21. Connectors for motion element
22. Locking pins
23. Straps for forearm support
24. Motor A
25. Motor B
26. Palmar hand support
27. Dorsal hand support
28. Folds down the backrest (transport
position)
29. Wheels
30. Bracket for adjustment of the position-
ing angle
31. Strap for upper arm support
32. Connector for programming unit
Subject to technical modifications
(07/2008)