Therapy Parameter Details - ORMED.DJO ARTROMOT-E2 Manual De Operación

5.3 Therapy parameter details

• To access the programming level you
need, repeatedly press the MENU key.
• The treatment parameters are selected
with the different parameter keys.
• To change the treatment values, press
the + / – keys.
• To enable/disable a function, press the
respective parameter key again.
• To save the entered values, press the
STOP key.
LEVEL 1:
n extension
maximum value:
n flexion
maximum value:
n pronation
maximum value:
n supination
maximum value:
• The programmed values and the
• To ensure a physiological motion, the
• To ensure that the movements you
- 5 degrees
140 degrees
• When the START key is pressed in
- 90 degrees
90 degrees
• Horizontal adduction/abduction is
67
Note!
values (degrees) measured on the
patient may deviate slightly.
carriage simultaneously moves to the
following positions in the synchro-
nized mode:
− maximum extension value and
maximum pronation value
− maximum flexion value and maxi-
mum supination value.
program are physiological in nature,
we recommend to program the car-
riage in the following order:
1. maximum extension value
2. maximum pronation value
3. supination = 0°
(to relieve the elbow)
4. maximum flexion value
5. maximum supination value
the synchronized mode, the carriage
will first move to the position halfway
between the set maximum extension/
flexion values as well as the prona-
tion/supination values. The carriage
will stop in this position. Treatment
begins when you press the START
key again.
adjusted manually. These are possible
settings:
horizontal adduction :
horizontal abduction:
120°
0°