ORMED.DJO ARTROMOT-E2 Manual De Operación página 74

Note!
• If a pause has been programmed, the
carriage will stop for the pause each
time the maximum stretching value is
attained.
• Enabling the stretching in supination
function automatically disables motor
A. The only movement performed is
pronation/supination.
• It is not possible to combine a second
stretching function with the special
function "stretching in supination".
• During operation, the display will
show the symbol
left-hand corner.
LEVEL 6:
n EROM repeat
extension/pronation
The special "EROM repeat extension/pro-
nation" function allows a more efficient
exercise in the last 10 ° before the set
maximum extension and pronation
values.
For this protocol, the CPM device starts
in the middle between the set maximum
extension/flexion and pronation/supina-
tion values. First of all the carriage moves
simultaneously to the maximum flexion
angle and to the maximum supination
angle. Then it moves simultaneously to
the maximum extension angle and to
the maximum pronation angle.
When the set extension/pronation value
has been reached, the carriage reverses
10 ° toward flexion/supination and then
moves back again to the maximum ex-
tension/pronation angle. The movement
through the final 10 ° is repeated five
times at a slow speed.
At the end of the cycle, the carriage will
again move to the maximum flexion
value, at the same time as the maximum
supination value, and then starts an-
other cycle with five repetitions through
the last 10 ° of extension/pronation.
in the upper,
74
This sequence can be repeated as often
as needed. You can stop treatment
with the STOP key; after the pro-
grammed therapy duration, it will stop
automatically.
Default: disabled
n EROM repeat
flexion/supination
The special "EROM repeat flexion/supi-
nation" function allows a more efficient
exercise in the last 10 ° before the set
maximum flexion and supination values.
For this protocol, the CPM device starts
in the middle between the set maximum
extension/flexion and pronation/supi-
nation values. First of all the carriage
moves simultaneously to the maximum
extension angle and to the maximum
pronation angle. Then it moves simulta-
neously to the maximum flexion angle
and to the maximum supination angle.
When the flexion/supination value has
been reached, the carriage reverses 10 °
toward extension/pronation and then
moves back again to the maximum
flexion/supination angle. The movement
through the final 10 ° is repeated five
times at a slow speed.
At the end of the cycle, the carriage will
again move to the maximum extension
value, at the same time as the maximum
pronation value, and then starts another
cycle with five repetitions through the
last 10 ° of flexion/supination.
This sequence can be repeated as often
as needed. You can stop treatment
with the STOP key; after the pro-
grammed therapy duration, it will stop
automatically.
Default: disabled