Safety Information; Operating Safety - ORi X-zone Com Manual De Instrucciones

2.2

SAFETY INFORMATION

The following safety instructions must be observed for the X-zone Com.
2.3

OPERATING SAFETY

Repairs: Device repairs or modifications not mentioned in the Operating Manual may be performed
only by the manufacturer or a service technician authorised by the manufacturer.
Technical improvements: The manufacturer reserves the right to update technical data to keep pace
with technological improvements without prior notice. Information about these activities and possible
upgrades to this Manual are available from ORI Abwassertechnik GmbH & Co. KG.
8
CAUTION
This device must be inspected and maintained by qualified
specialists at regular intervals (see IEC 60079-1).
WARNING
Explosion hazard
If the housing or any of its components should become dam-
aged, put the device immediately out of operation and imple-
ment measures to prevent unintended or unauthorised use.
WARNING
Explosion hazard
Perform repair, service, and maintenance work only in a non-
explosive environment.
WARNING
Danger: Risk of fatal injury
To avoid fatal injury, follow the Dräger X-zone 5x00 and
Dräger X-am 5x00 Safety Instructions carefully and without
exception.
Rev20141022-01 / from FW 1.00z / SW 1.0.16