Operating Manual X-zone Com - Assembly and Initial Operation
Open
Fig. 4.5: Insert the SIM card by unscrewing the lid of the modem, sliding the card holder in the direction of the ar-
row and then flipping it open.
4.2.3 Antenna installation/removal
Do not twist the antenna rod when installing or removing the antenna. To tighten or loosen the an-
tenna, turn the connector nut to avoid disconnecting the centre contact at the antenna base (Fig. 4.6).
WARNING
Explosion hazard!
Only the original antenna (ORI-order-no. 8094108, Dräger
Order no. 8324372) should be connected to the antenna sock-
et.
Fig. 4.6: HF socket on X-zone Com
SIM card
Close
Connector nut
K4-HF
socket
21