Saving And Loading X-Zone Com Settings; Show Data History - ORi X-zone Com Manual De Instrucciones

5.3.3 Saving and loading X-zone Com settings

If all entries are valid, the system will write the selections to X-zone Com when you click [Upload]. In-
valid entries appear in red and may not be saved.
Clicking [Load] reads the current settings from X-zone Com and displays them in the Manager Soft-
ware.
Fig. 5.7: Sending settings to and reading settings from X-zone Com.

5.3.4 Show data history

If you click [Open Log] under "History", a window opens that allows you to open BSH data files
sent by e-mail. To select a recorded measurement, click the [...] button and select the file you require.
Clicking on [Load] displays the selected file's measured readings in a table in the [Data] template.
Fig. 5.8: Table showing the recorded measurements of a loaded BSH data file in the data viewer.
Explanation of some of the columns in the table:
Table Column
Type
Value
Unit
30
NOTE
You don't have to connect to X-zone Com to be able to use
the data history in the Manager Software.
Value
L
M
E
Vol%, %UEG, %LEL, %LIE,
ppm, mg/m3, ppb, mbar,
hPa, kPa, mg/L
Rev20141022-01 / from FW 1.00z / SW 1.0.16
Meaning
Local reading
Maximum level of the gas for the group
Error
Logged gas measurement value
Unit of measurement