Disconnecting From X-Zone 5X00 - ORi X-zone Com Manual De Instrucciones

X-zone 5x00
identification number
Measurement reading
used for a gas
Alarm information
Maximum number
X-zone 5x00s in the net-
work
4.3

DISCONNECTING FROM X-ZONE 5X00

If the connection between X-zone Com and X-zone 5x00 is interrupted for more than 1 minute, X-zone
5x00 will indicate a device error. To avoid this, leave the RS485 connection in place until you have
switched off X-zone Com (see Chapter 6.3). This will prevent a device error.
24
Open network
Serial number
Current measured value of the
connected X-zone 5x00

of
25
NOTE
X-zone Com may be connected to any X-zone 5x00 in the
wireless network. It is not necessary to connect it to the main
device, e.g. in a closed network.
NOTE
X-zone Com transmits a signal to X-zone at regular intervals. If
the connection is lost for more than 1 minute X-zone 5x00 will
indicate a device error.
Rev20141022-01 / from FW 1.00z / SW 1.0.16
Closed network (group)
ID used by group individuals
(station number)
Current maximum measured group
value

15