Error Display - ORi X-zone Com Manual De Instrucciones

Operating Manual X-zone Com - X-Zone Com Controls
E-mail send function active. At least one
recipient.
Blinking: Sending e-mail.
Text message successfully transmitted /
activated.
Blinking: Sending text message.
Battery completely charged
Battery charging progress shown using
circular display: Battery is charging.
GPS successfully determined.
Blinking: Determining coordinates.
Signal strength approx. 100%
Signal strength approx. 20%
Blinking: Registering in GSM network
currently active.
Example:
1.

6.4.2 Error display

Various errors may appear in the display. Ch. 10.1 contains a table with explanations of the different
errors and suggestions for remedying the situations. Press the right button to move from error to error.
Error number
Fig. 6.5: Example of an error message appearing in the display. It includes the number of the error and a brief de-
scription.
Example:
SMS
not sent
Email
not sent
The battery has a 75% charge, signal strength is 100%, connec-
tion to Mcloud and e-mail-functions are enabled, GPS coordi-
nates have been determined. Overall status is ok.
Email
rejected
Text messages and e-mail did not transmit during the function test.
Transmission of data to Mcloud has not been enabled in this instance.
Possible reasons:
Invalid telephone number

Erroneous telephone number in "to" or "copy to"

Sending of e-mail and transmission
to Mcloud not possible / interrupted.
Text message could not be sent.
Battery charge expended. Device
may shut down unexpectedly.
No GPS (turned off or reception not
possible)
Not connected to GSM network
Brief description
43