Idiomas disponibles
Idiomas disponibles
Swivel arm guide rollers
16.3
Storage
Store the machine in a dry, frost-proof and lockable place when not in use. Disconnect the
machine from the power supply. Make sure that unauthorised persons and especially children do
not have access to the machine.
Improper storage can damage and destroy important components. Only store packed
or already unpacked parts under the intended ambient conditions!
16.4
Disposal
Observe the national waste disposal regulations. Never dispose of the
machine, machine components or operating equipment in the residual waste.
If necessary, contact your local authorities for information regarding available
disposal options.
If you purchase a new machine or equivalent equipment from your specialist
dealer, he is obliged in certain countries to dispose of your old machine
properly.
HOLZMANN Maschinen GmbH
Saw blade:
•
•
•
•
Position I: see techn. data
Position II: see techn. Data
Position III: see techn. Data
•
•
Scoring saw blade:
•
•
•
•
•
•
NOTE:
the rocker lever / lower the motor, requiring no manual
adjustment
Cleand swivel arm
By turning the 4 screws (1) you can close or move away
the eccentric guide rollers and adjust a smooth running
www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
Open the maintenance door
Rotate the rocker lever (1) downward with a wrench
to the lock position
Replace the old V-belt (2) with a new one.
Position drive belt (2) on corresponding motor belt
pulley (3) and drive belt pulley (4)
Rotate the rocker lever upward
Close the maintenance door
Open the maintenance door
Lift the motor (5)
Replace the old V-belt (6) with a new one.
Position new V-belt
Lower the motor
Close the maintenance door
Belt tension will be self-adjusted after flipping of
N O TE
61
FKS400V32PRO_400V
