Idiomas disponibles
Idiomas disponibles
Adjust the riving knife and the saw blade guard after each saw blade change.
Assembly / exchange / adjustments scoring saw blade
Checking / adjusting / replacing V-belt
For optimum power transmission, the V-belt must be free of cracks and frays and have optimum
tension. Check the condition of the V-belt at least every 3 months, more frequently if used daily.
Broken or frayed V-belts must be replaced.
HOLZMANN Maschinen GmbH
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
NOTE:
adjusted so that it cuts a slot of a depth of 1.5 - 2mm.
The scoring saw blade has to be oriented exactly to the
main saw blade
Adjustments:
•
Heihght of the scoring saw blade
Lateral adjustment oft he scoring saw blade
www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
N O TE
Adjust the cutting height to the maximum
possible level.
Set the saw blade to 90°.
Push the sliding table all the way foreward.
Open the saw blade guard (7).
Fix the drive shaft with the supplied Allen key (6).
Loosen the flange nut (4) with the saw blade
wrench (5) (right-hand thread!)
Remove flange nut (4), flange (3) and scoring saw
blade (2) from the drive shaft.
Clean the drive shaft, the shaft flange (1) and all
parts thoroughly from impurities
Replace the old scoring saw blade with a new
one.
Make sure that the new scoring saw blade is
undamaged and not dirty.
Place the scoring saw blade (2), flange (3) and
flange nut (4) on the drive shaft.
Fix the drive shaft with the supplied Allen key (6).
Tighten the flange nut with the saw blade
wrench (5) (right-hand thread!)
NOTE:
Retighten the flangenut tightly to prevent the
nut from loosening during operation.
(tightening torque: 25Nm)
Close the saw blade guard.
Bring the sliding table back into position.
The height of the scoring blade must be
Adjust main saw blade to 90°
- Loosen screw (1)
- Turning the setting screw (2) to the left .
- Turning the setting screw (2) to the right .
- Fix screw (1)
- Turning the setting screw (3) to the left
- Turning the setting screw (3) to the right
.
.
60
FKS400V32PRO_400V
