Idiomas disponibles
Idiomas disponibles
specific car seat with Chicco BebèCare.
The password is shared with all users who
interact with the car seat on which Chicco
BebèCare is installed.
IMPORTANT: When creating the family ac-
count, an internet connection must be avai-
lable (mobile data or WiFi network).
IMPORTANT: If the family password is chan-
ged, the new password must be shared with
all the users who use the same family account.
c) Enter the emergency numbers
The emergency numbers to which the alarm
messages will be sent must be entered upon
initial access (second level - see paragraph 9.2
How Chicco BebèCare functions) containing
the data needed to geolocate the area where
the baby is located.
A minimum of 1 to a maximum of 5 emer-
gency numbers must be entered.
The emergency numbers must be selected
from the contacts in your smartphone and
can be added, deleted and/or replaced in the
future.
IMPORTANT: During this operation, an internet
connection must be available (mobile data or
WiFi network).
IMPORTANT: The emergency numbers must
be mobile phone numbers and not landline
or national emergency numbers.
IMPORTANT: Always check that the emer-
gency numbers are correct and are functio-
ning after entering them.
d) Associate the car seat with the family
account
To associate the car seat with Chicco BebèCa-
re to the family account , proceed with scan-
ning the QR code on the car seat. The QR code
is printed on the type approval label and can
only be seen after removing the silver film,
scratching it with a coin (Fig. 58). By scanning
the QRCode, the application recognises the
car seat model, then simply turn on Blue-
tooth®, apply pressure on the car seat and
move the smartphone near the car seat to be
associated and connect the car seat with the
family account.
Up to a maximum of 3 car seats with Chicco
BebèCare can be associated with the same
family account.
The specific car seat can be associated with
ONLY one family account.
IMPORTANT: If the QR code is already visible
or partially visible, contact Customer Service.
IMPORTANT: When scanning the QR code, an
internet connection must be available (mobi-
le data or WiFi network).
e) Check the correct operation of the sen-
sors
Periodically perform pressure tests on the car
seat (safety, during the journey on they may
harm) to check that Chicco BebèCare is fun-
ctioning.
f) Enter the information about the baby
After associating the car seat with the family
account, enter the name and date of birth of
the child. You can also enter a photograph.
Artsana does not guarantee equipment ope-
ration in conditions other than those indi-
cated above, or in the case of improper use
(including, but not limited to, use with minors
who are not correctly secured to the car seat,
if used with animals, etc.).
9.2 HOW CHICCO BEBÈCARE FUNCTIONS
The system is activated/connected after a few
seconds from the moment the baby is pla-
ced in the car seat and signals the presence
of the baby in the car seat via the APP. The
activation/connection time varies based on
the specific characteristics of the smartphone;
in some cases, a few dozen seconds may be
necessary.
The alarm system is activated the moment
that the smartphone that is connected to the
car seat moves away from the car in which the
car seat is installed with the baby in the car.
Chicco BebèCare has two alarm levels:
1. First level alarm: if the smartphone moves
away from the car in which the car seat is
installed with the baby in the car, an acou-
stic and visual alarm will appear on the
smartphone that can be silenced within 40
seconds. If the smartphone moves towards
36
