Checking The Power Cable Status - Fiorenzato F64 E Manual De Instalación, Uso Y Mantenimiento

Ocultar thumbs Ver también para F64 E:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 221
EN
Loosen the fastening screw (Part. 1) and pull out
the coffee discharge tube (Part. 2) from its position.
Wash the tube with warm water and a pH-neutral,
unscented,
degreasing
and
cleaning
specifi cally for use in the food industry.
Wipe dry with a soft cloth.
Using a vacuum cleaner and a dry cloth, clean all
coffee powder residues from the discharge tube
housing.
The exterior of the machine body must be cleaned
using soft cloths and products suitable for use in
the food industry.
ATTENTION! Do not use abrasive sponges
and/or aggressive products that may damage
the external surfaces of the machine.
ATTENTION! It is forbidden to use water or
steam jets to clean the machine body.
36 / 44 EN
ON DEMAND line
agent
2
1
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
ON DEMAND line
After cleaning, reassemble the machine, put the
discharge tube (Part. 1) back into place (Part. 2)
and secure it by tightening the screw (Part. 3).
Place the hopper (Part. 4) and secure it with the
appropriate screw (Part. 5).
Close the hopper with its lid (Part. 6).
The machine is ready to be used again after being fed
and fi lled with coffee beans.
6.1.2

Checking the power cable status

AT THE END OF EVERY SHIFT: check the power supply cable.
Disconnect the cable from the power socket, check
visually and by touching that the protective sleeve
is intact, that the wires are not exposed and that the
plug is not damaged.
ATTENTION! If the power cable is damaged,
replace it with one of the same type.
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
EN
6
4
5
3
2
1
37 / 44 EN
Tabla de contenido
loading

Este manual también es adecuado para:

F64 evoF83 eF71 ek

Tabla de contenido