Warning Labels Attached To The Machine; Installation; Storage; Choosing The Installation Location - Fiorenzato F64 E Manual De Instalación, Uso Y Mantenimiento

EN

3.6 Warning labels attached to the machine

An adhesive label is attached to the bottom of the grinder-doser near the power cable
(see Fig. 1) indicating the danger of electrocution. The label indicates the presence of
live components inside the machine body.
ATTENTION! It is forbidden to remove the bottom cover when the plug
is connected to the power socket. All electrical maintenance work (e.g.
replacement of a damaged cable) must be carried out by qualifi ed technicians
when the appliance is disconnected from the mains power supply.
4

INSTALLATION

ATTENTION! Please read the following instructions carefully before
installing and operating the appliance.

4.1 Storage

If the appliance is not immediately installed where it is to be used and it is necessary
to store it temporarily, it should be put in a safe place that meets the following
requirements:
• the place chosen for temporarily storing the appliance should be a closed
environment, protected from the sun and bad weather conditions;
• the temperature of the storage location must be between 5°C and 40°C, with a
relative humidity of between 30% and 90%;
• if the appliance is to be stored for a long time before being installed, it should be
kept in its original packaging to ensure better protection.
16 / 44 EN
ON DEMAND line
Fig. 6
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
ON DEMAND line

4.2 Choosing the installation location

Given the function of the grinder-doser, it is advisable to PLACE IT close to the coffee
machine.
Before installing the appliance, please also ensure that the installation location meets
the following requirements:
• The surface on which the appliance is to be placed must be fl at, well-levelled and
strong enough to support its weight;
• the available space must be large enough to allow proper installation and easy use
of the appliance;
• the appliance must not be installed near sinks and/or taps, which may cause it to
become wet with jets and/or splashes of water;
• The place of use must be suffi ciently well-lit and well-ventilated;
• Close to the installation position, there must be a socket, which complies with the
regulations in force in the country of use, for connecting the appliance to the mains
power supply. ATTENTION! The socket must be equipped with an effi cient earthing system.
ATTENTION! The mains power supply must also be equipped with a thermal-
magnetic circuit breaker located upstream of the socket, in a position known
to and easily accessible by the operator in order to protect the appliance from
overloads and voltage fl uctuations and the user from the risk of electrocution.

4.3 Unpacking and handling the appliance

After opening the packaging, carefully check that the appliance is intact and that there
are no damaged parts.
• Open the packaging near the point of installation, ensuring that there is enough
space to handle the appliance safely.
• Take the appliance out of its packaging, holding it fi rmly and securely.
• Place the grinder-doser on the worktop.
ATTENTION! Take extreme care when handling the appliance. Its weight
(18 ÷ 25 kg) and the particular rounded shape of the machine body may
lead to the risk of slipping and loss of grip, with possible falling and bruising/
crushing of the feet when lifting and/or of the hands when positioning the
appliance on the worktop. If you are not sure you have a secure grip, it is
advisable to ask another person to help.
ATTENTION! Packaging parts must not be left within the reach of children
as they are a potential source of danger. Keep the packaging until the
warranty expires.
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
EN
17 / 44 EN