Machine Controls; Switch; Activation Microswitch; Operator Control Panel - Fiorenzato F64 E Manual De Instalación, Uso Y Mantenimiento

EN

5.2 Machine controls

The grinder-doser is controlled by the On/Off switch (see paragraph 5.2.1), an activation
microswitch located near the fi lter holder fork (see paragraph 5.2.2) and an operator
control panel with a TOUCH-type display, for selecting and setting all the operating
functions of the appliance (see paragraph 5.3). All information on the operating status
of the appliance, working parameters and commands that can be given are shown on
the display on the front of the machine. All the command and signalling devices on the
grinder-doser are described below.
5.2.1

Switch

Switches the appliance on and off.
• Turned to the 'O' position: appliance
off (power supply disconnected).
• Turned to the 'I' position: appliance
on (electrically powered).
5.2.2

Activation microswitch

Controls the start of the grinding cycle when pressed by the fi lter holder cup. The
command is not active in the 'Direct' operating mode (see paragraph 5.3.2.2).
• Enabled for operation only in
'STANDARD', 'AUTOMATIC' and
'PRE-SET' operating modes (see
paragraph 5.3.2.2).
• This particular command allows the
user to start grinding by holding the
fi lter holder cup after selecting the
required dose.
20 / 44 EN
ON DEMAND line
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
ON DEMAND line

5.3 Operator control panel

When the grinder-doser is switched on, after a few seconds for the system to start up,
the control panel display shows the HOME page, with all the function buttons required
to use and manage the appliance.
The management software adopted by Fiorenzato for its coffee grinder-dosers is
extremely intuitive to use. This user guide will allow you to quickly become familiar
with the function buttons and the various setting options on your new appliance. It has
touch-screen panel, which means that functional commands, menu navigation and the
setting of preferences and working parameters are carried out with a simple touch of
the fi nger on the sensitive areas of the display.
5.3.1 Home page
Fig. 11 shows the HOME page with a description of the function buttons and display
fi elds. The HOME page can be customised from the 'Settings menu', therefore the
image shown in the fi gure below may differ from the screen actually displayed on your
appliance when it is fi rst switched on.
All the functions accessible from the 'Settings menu' are described in the following
paragraphs.
13
1
4
5
9
8
Fig. 11 - Home page
With reference to Fig. 11, the display fi elds and function buttons on the HOME page are:
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
EN
11
2
3
6
7
10
12
21 / 44 EN