Requesting Spare Parts; Disposal - Fiorenzato F64 E Manual De Instalación, Uso Y Mantenimiento

Ocultar thumbs Ver también para F64 E:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 221
EN
8

REQUESTING SPARE PARTS

If it is necessary to replace worn parts of the grinder-doser (e.g. grinding blades), the
end user (e.g. bartender/restaurateur, etc.) must contact their local distributor, a direct
intermediary with Fiorenzato M.C. S.r.l., and communicate the grinder-doser model in
their possession for identifi cation and to request the supply of original spare parts. Only
authorised local distributors will then be given the opportunity to register on our website
to order the required spare part.
To request spare parts, local distributors must:
Visit www.fi orenzato.com, enter the spare parts section and select the grinder-doser
model indicated by the end user.
Access the reserved area by entering their credentials on the form provided (at the
fi rst login, they must register by entering their identifi cation data).
Select the necessary spare parts using the exploded view tables of the product on
the portal.
Follow the guided procedure to complete their order and send it to Fiorenzato M.C. S.r.l.
The local distributor will be contacted by personnel of Fiorenzato M.C. S.r.l., who will
take care of the request.
ATTENTION! Please note that the replacement of grinding blades and,
in general, of all internal parts of the grinder-doser must be carried out by
specialised technicians.
ATTENTION! Fiorenzato M.C. S.r.l. is not liable for any personal injury
and/or damage to the appliance caused by the replacement of components
with non-original spare parts by unqualifi ed persons.
42 / 44 EN
ON DEMAND line
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
ON DEMAND line
9

DISPOSAL

ATTENTION! Different countries have different laws regarding the
disposal of electrical and electronic products, and therefore the
requirements of the specifi c laws and organisations where disposal
takes place must be observed.
If the identifi cation label attached to the appliance
bears the crossed-out wheelie bin symbol shown in
the fi gure, this means that the product is classifi ed,
according to current regulations, as an electrical or
electronic appliance and complies with EU Directive
2002/96/EC (WEEE) and therefore, at the end of its
useful life, it must be disposed of separately from
household waste.
The appliance must therefore be handed over free
of charge to a waste sorting centre for electrical and
electronic equipment or returned to the retailer when
a new equivalent appliance is purchased.
The user is responsible for taking the appliance at the
end of its life to the appropriate collection facilities,
under penalty of the sanctions laid down in applicable
legislation on waste. Appropriate waste sorting for
subsequent delivery of the discarded appliance for
recycling, treatment and environmentally sound
disposal helps to avoid any possible negative effects
on the environment and health, and promotes the
recycling of the materials of which the product is made.
For more detailed information on available collection
systems, please contact your local waste disposal
service or the shop where you purchased the product.
Producers and importers fulfi l their responsibility
for
environmentally
sound
recycling,
and disposal either directly or by participating in a
collective system.
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
EN
treatment
43 / 44 EN
Tabla de contenido
loading

Este manual también es adecuado para:

F64 evoF83 eF71 ek

Tabla de contenido