Changing Dose Times; Operating Modes - Fiorenzato F64 E Manual De Instalación, Uso Y Mantenimiento

EN

5.3.2.1 Changing dose times

By pressing the 'Change dose times'
option in the 'Technical Settings' menu
you can access the page for setting the
grinding times for a single, double and
triple dose.
N.B. The triple dose grinding time is only
displayed if the 'Triple dose display' option
has been activated in the Settings menu
(§ 5.3.2.6).
Use the function buttons or
increase or decrease dispensing times.
The changed parameters are saved
automatically when exiting the page.

5.3.2.2 Operating modes

By selecting the 'Operating Modes' item
in the 'Technical Settings' menu, you can
access the setting page, which allows
you to activate one of the four different
operating modes of the grinder-doser
(Standard, Direct, Automatic or Pre-
selection) by simply selecting the one
required.
The 'Standard' operating mode is the
default mode when the machine is
switched on for the fi rst time. The change
in the operating mode from 'Standard' to
'Automatic', 'Preselection' or 'Direct' (and
vice versa) is stored in the memory even
after the grinder-doser has been switched
off.
Below is an example of how to dispense coffee according to the various selectable
operating modes.
24 / 44 EN
ON DEMAND line
Change dose times
Single dose Double dose
to
Operating mode
Standard
Direct
Automatic
Pre-selection
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
ON DEMAND line
• Standard' operating mode
Select the dose required (single, double or triple dose, if enabled) by pressing the
relevant function button (see Fig. 11 Part. 4, 6 or 11). The icon of the pressed button
starts fl ashing to indicate that the selection has been made.
You can control the start of the grinding process by pressing the activation
microswitch with the fi lter holder cup. After the command has been given, the
grinder-doser is activated for the grinding time corresponding to the specifi c dose
to be processed.
Press and hold the 'Manual Grinding' button (see Fig. 11 Part. 8) to start continuous
grinding. The grinding process stops automatically when the button is released.
Standard
Standard
CLICK!
Double dose selection Dispensing activation
Fig. 12 - Double dose dispensing in 'Standard' mode.
• 'Direct' operating mode
Press the function button for a single, double or triple dose (see Fig. 11 Part. 4, 6 or
11); after the command has been given, the grinding of the required dose is started
immediately.
Press and hold the 'Manual Grinding' button (see Fig. 11 Part. 8) to start continuous
grinding. The grinding process stops automatically when the button is released.
In this operating mode, the activation microswitch is disabled and all the dose
selection buttons (see Fig. 11 Part. 4, 6, 8 and 11) can be activated.
Direct
Double dose selection Double dose dispensing
Fig. 13 - Double dose dispensing in 'Direct' mode.
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
EN
Double dose dispensing
25 / 44 EN