EN
6
GRINDER-DOSER MAINTENANCE
6.1 Routine maintenance
ATTENTION! Before carrying out any routine maintenance work on the
grinder-doser, disconnect it from the power supply by turning the power
switch (Fig. 16) to the 'O' (OFF) position and disconnect the power plug from
its socket (Fig. 17).
Fig. 16
All routine maintenance for your appliance is summarised in the table below.
Fiorenzato M.C. S.r.l. recommends that customers strictly follow the instructions
given and carry them out within the stated times and as described.
ROUTINE MAINTENANCE WORK
Frequency
Type of intervention
At the end of every
Thorough cleaning of the
shift
appliance
At the end of every
Checking the power cable status User
shift
Thorough cleaning of the
Every month
grinding blades
When necessary
Shutting down the Grinder-doser User
On the set deadline
(indicated
on
the
'HOME' page by the
Replacing the grinding blades
appearance of the
'
' icon to the left of
the logo).
34 / 44 EN
ON DEMAND line
Fig. 17
Implemented by
Par.
User
6.1.1
6.1.2
User
6.1.3
6.1.4
Qualifi ed
operator or
6.1.5
specialised
technician
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
ON DEMAND line
6.1.1
Cleaning the appliance
AT THE END OF EVERY SHIFT: Thoroughly clean the appliance.
•
Close the locking slide (Part. 1), loosen the
fastening screw (Part. 2) and remove the hopper
(Part. 3) from the appliance.
•
Remove the lid (Part. 4) from the hopper and empty
out the coffee beans inside it. We recommend that
you pour the coffee beans back into the original
bag and seal it hermetically to preserve the aroma.
•
Clean the inner and outer surfaces of the hopper
using warm water and a pH-neutral, unscented,
degreasing and cleaning agent specifi cally for use
in the food industry. Do not use abrasive sponges
and/or aggressive detergents that may damage
the hopper surfaces.
•
Thoroughly dry the washed parts with a soft, dry
cloth.
ATTENTION! The hopper cannot be washed
in a dishwasher.
•
Using a soft-bristled brush (clean and sanitised)
and a vacuum cleaner, remove the coffee beans
and coffee powder residue from the grinding
chamber (Part. 1).
ATTENTION! Do not use water and/or
detergents to clean the grinding chamber
and grinding blades.
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
EN
4
3
2
1
2
35 / 44 EN