2. Select the desired washing program.
3. Select the desired options and confirm with "OK".
4. Start the washing program.
5. The following manual functions can be executed via the dis-
play while a washing program is running:
a Lock/raise dryer
b Lock/raise roof brush
c Lock/outwards movement of the side brushes
d Stop the wheel brushes
Press the "Information" button to show the program progress
display.
36
Interrupting the currently running program
1. Press the "Stop" button.
The program is interrupted.
2. Press the "Start" button to resume the program.
After the program has finished, the positioning light indicates
whether the vehicle should be driven forwards or backwards out
of the system.
1. Drive the vehicle forwards out of the system.
Manual functions can be performed with the following assem-
blies:
Portal - move
Roof brush - raise and lower, switch on and off
Side brushes - move in and out, switch on and off
Dryer - raise and lower, switch on and off
Wheel brushes - move in and out, switch on and off
1. Select Service / Manual mode / Manual portal in the main
menu.
The menu with executable manual functions opens.
2. Select the desired assembly.
The executable manual functions are shown in yellow.
3. Start the manual function.
The selected assembly must be deselected before selecting
another assembly.
Refilling the cleaning and care agents
WARNING
Danger due to chemicals
Observe the safety data sheets for the cleaning and care agents
used.
Note
Press the "General Infos" and "Cleaning agent filling levels" but-
tons on the display to display the filling levels", see General In-
fos.
The filling level display is an optional extra.
English
Program end
Manual mode
Capítulos
