Overview; Control Panel - Honeywell FRIEDLAND FGGK Serie Manual De Instrucciones

4

Overview

4.1

Control panel

Symbol Item
Power indicator
Arming mode indicator
Event log indicator
Personal attack indicator
1. Home automation buttons (I/II/III)
2. Personal attack button
3. Display
4. Power indicator
5. Arming mode indicator
6. Event log indicator
7. Personal attack indicator
8. Cover
9. Power adaptor connection
10. Battery (7.2V)
11. Connection terminal block
12. Tamper switch
Status Function
On The mains power is in use.
Flashing Quick flashing: The battery is in use.
Slow flashing: Low battery.
Off The mains power and the battery are not in use.
On The system is set to "Fully Arm".
The system is set to "Holiday Arm".
Flashing The system is set to "Part Arm-I".
The system is set to "Part Arm-II".
Off The system is set to "Disarm".
On System message.
Flashing Alarm memory.
Off Normal.
On The personal attack button has been pressed.
Flashing ---
Off Normal.
Symbol Function
To enter a specific digit.
...
To enable a function (ON).
To select an option (YES).
To disable a function (OFF).
To unselect an option (NO).
To move up in the menu.
To move down in the menu.
To move one level up in the menu.
To confirm a selection.
To set the system to "Fully Arm".
To set the system to "Holiday Arm".
To set the system to "Part Arm-I".
To set the system to "Part Arm-II".
To set the system to "Disarm".
To enter test mode.
To enter program mode.
7