Program Mode (Program Mode); User Setup (User Setup); Pin Code (Pin Code); Duress Code (Duress Code) - Honeywell FRIEDLAND FGGK Serie Manual De Instrucciones

6.2

Program mode (PROGRAM MODE)

You can set up the system using the instructions in the manual or using the GlobalGuard PC setup software available at
www.friedlandproducts.com
You can only program home automation programmes, events and schedules using the PC setup software. The home
automation buttons (I/II/III) on the control panel can only be programmed from the PC setup software.
If you use the PC setup software, make sure that the PC is connected to the same router as the router connected to the IP
gateway . If you use a wireless connection, make sure that the PC is within operating range of the router.
1. Make sure that the system is in disarm mode.
2. Press the button.
3. Enter the 4-digit PIN code (Admin).
4. Press the button.
Note: If you use the PC setup software to change the program settings, the keypad on the control panel will become inactive
(unless you press and hold the ESC button for 3 seconds).
6.2.1

User setup (USER SETUP)

PROGRAM MODE 1. USER SETUP
6.2.1.1

PIN code (PIN CODE)

You can set different PIN codes for different items: Admin (ADMIN) / User (USER) / Duress code (DURESS CODE).
6.2.1.2

Duress code (DURESS CODE)

If the system is disarmed using the duress code, the system will disarm as normal. All email contacts in the online account will
receive an email alert. All mobile devices running the app will be alerted. The appropriate duress message will be sent.
Note: The duress code can only be entered from the control panel to alert contacts when an occupant enters the property.
6.2.1.3

User name (NAME)

The display shows the user name once the system is armed or disarmed by a specific user. The maximum number of characters
for each user name is 15.
1. Press the button to toggle between letters and digits.
2. Press the button to move the cursor left.
3. Press the button to move the cursor right.
4. Press the button to delete the character under the cursor.
5. Press and hold the
1-1 ADMIN SETUP
1-2 USER1 SETUP
1-3 USER2 SETUP
1-4 USER3 SETUP
1-5 USER4 SETUP
1-6 USER5 SETUP
1-7 USER6 SETUP
1-8 USER7 SETUP
1-9 DURESS CODE
Default settings
Item
PIN CODE
NAME
REMOTE
DURESS CODE
button to erase all characters.
:1 PIN CODE ENTER PIN: CODE:
:2 NAME ENTER NAME
:3 REMOTE :3-1 LEARNING ID
:3-2 PANIC
:3-3 STATUS
:3-4 DEL DATA
PIN CODE ENTER PIN: CODE:
PIN CODE ENTER PIN: CODE:
PIN CODE ENTER PIN: CODE:
PIN CODE ENTER PIN: CODE:
PIN CODE ENTER PIN: CODE:
PIN CODE ENTER PIN: CODE:
PIN CODE ENTER PIN: CODE:
ENTER PIN: CODE:
Message
ADMIN: 1234
USER 1-7: ---
---
---
15
SEND DISARM. WAITING
30 SEC...
SELECT ON>* / OFF>#
SELECT ON>* / OFF>#
SELECT YES>*/ NO>#