Battery Monitoring; Low-Battery Condition; Control Panel; Remote Control - Honeywell FRIEDLAND FGGK Serie Manual De Instrucciones

Message
EVENT LOG
KEY IN UP/DOWN
EVENT XXX
MM/DD HH:MM:SS
NO EVENT
PANIC SIREN
WIREFREE KEYPAD
PANIC SIREN
[LOCATION]
ZXX PANIC/PA
USERXX
RXX PANIC SIREN
[LOCATION]
ZXX INTRUDER
[LOCATION]
ZXX FIRE
FULLY ARM
USERXX
HOLIDAY ARM
USERXX
PART-ARM-I
USERXX
PART-ARM-II
USERXX
DISARM
USERXX
[LOCATION]
ZXX TAMPER
TAMPER
WIREFREE KEYPAD
7.15

Battery monitoring

7.15.1

Low-battery condition

All system devices continuously monitor their battery condition. When the low-battery indicator on a device comes on, replace
the battery for the device as soon as possible. Before replacing the battery, switch the system into test mode. After replacing
the battery, switch the system back into operating mode.
If a door/window contact detector or a PIR movement detector has a low-battery condition, the condition will be recorded by
the control panel and an event message will be stored in the event log.
7.15.2

Control panel

If the power supply is interrupted, the control panel will be powered by the rechargeable main battery. Under normal-battery
conditions, the power indicator will flash at 1-second intervals. Under low-battery, the power indicator will flash at 3-second
intervals.
7.15.3

Remote control

Under low-battery conditions, the transmit indicator will continue to flash after the button has been released. Under normal-
battery conditions, the transmit indicator will go off within 2 seconds after the button has been released.
7.15.4

Door/window contact detector

Under low-battery conditions, the transmit indicator will come on for 1 second after the door or the window has been opened.
Under normal-battery conditions, the transmit indicator will not come on (unless the detector is in test mode with the battery
cover removed).
7.15.5

PIR movement detector

Under low-battery conditions, the indicator behind the detector lens will flash when movement is detected. Under normal-
battery conditions, the indicator behind the detector lens will not come on (unless the detector is in walk-test mode).
Description
Message display
Event xxx
Date & Time
No event
The personal attack button on
the control panel has been
triggered.
The panic siren has been
triggered by the wireless keypad.
The panic siren has been
triggered by zone xx.
The panic siren has been
triggered by user xx.
Intruder warning
Fire warning
Fully Arm by user xx.
Holiday Arm by user xx.
Part Arm-I by user xx.
Part Arm-II by user xx.
Disarm by user xx.
Zone sensor
Tamper
Wireless keypad
Tamper
Message
TAMPER
COMMS DEVICE
NO.XX TAMPER
COMMS DEVICE
XX INACTIVE
CONTROL PANEL
LOW BATTERY
COMMS DEVICE
XX LOW BATTERY
REMOTE/DETECTOR
XX LOW BATTERY
[LOCATION]
ZXX LOW BATTERY
RF JAMMED
CONTROL PANEL
AC POWER LOSS
COMMS DEVICE
XX AC POWER LOSS
SCHEDULE FUNC.
NO.XX TRIGGER
EVENT FUNC.
NO.XX TRIGGER
PROG. FUNC.
NO.XX TRIGGER
[LOCATION]
ZXX TEST
WIREFREE KEYPAD
XX LOW BATTERY
USERXX
RXX LOW BATTERY
27
Description
Control panel
Tamper
Communication device
Tamper
Communication device
Connection failure
Control panel
Low battery
Communication device
xx Low battery
Remote/Sensor device
xx Low battery
Zone sensor
xx Low battery
The radio frequency is being
jammed.
Control panel
Lost AC power
Communication device
xx Lost AC power
Schedule function
xx is triggered.
Event function
xx is triggered.
Programme function
xx is triggered.
Zone trigger
(Zone type is "Test")
Wireless keypad
xx Low battery
Remote control
xx Low battery