Chime Mode (Chime Mode); Part Arm-I Setup (Part-Arm-I); Part Arm-Ii Setup (Part-Arm-Ii); Detector Status (Detector Status) - Honeywell FRIEDLAND FGGK Serie Manual De Instrucciones

6.2.3.5

Chime mode (CHIME MODE)

You can enable and disable the chime mode for a security detector.
6.2.3.6

Part arm-I setup (PART-ARM-I)

You can activate and deactivate the detector zone when the system is set to "Part Arm-I".
6.2.3.7

Part arm-II setup (PART-ARM-II)

You can activate and deactivate the detector zone when the system is set to "Part Arm-II".
6.2.3.8

Detector status (DETECTOR STATUS)

You can enable or disable operation of the security detector.
6.2.3.9

Deleting the security detector (DETECTOR REMOVE)

You can delete the settings of the security detector from the control panel.
6.2.3.10

Siren at trigger (SIREN AT TRIGGER)

You can set whether the control panel will sound or become silent when the security detector is triggered.
6.2.3.11

Entry delay (ENTRY DELAY)

You can set the entry delay for the system when the system is armed. The entry delay is the time between triggering a security
detector configured with a delay and the alarm occurring. The entry delay affects all arming modes and is no longer
configurable for individual arming modes.
6.2.4

Home automation setup (HOME AUTO.)

PROGRAM MODE 4. HOME AUTO.
4-1 HOME AUTO. INPUT (01-32) CONT.
CONTROL SETUP NUMBER
4-2 HOME AUTO. INPUT (01-32) DEVICE
REMOTE/SENSOR NUMBER
Default settings
Item
HOME AUTO. CONTROL SETUP
LINK PANEL TO CONTROL
ALL ON
REMOTE ACCESS
MODEL TYPE
CONT. STATUS
CONT. REMOVE
HOME AUTO. REMOTE/SENSOR
LEARNING ID
DETECTOR STATUS
DETECTOR REMOVE
21
:1 LINK PANEL TO SENDING ID CODE. WAIT 2S.
CONTROL
:2 ALL ON SELECT ON>* / OFF>#
:3 REMOTE ACCESS SELECT ON>* / OFF>#
:4 MODEL TYPE DIMMER / SWITCH DEVICE / CURTAIN SWITCH
:5 CONT. STATUS SELECT ON>* / OFF>#
:6 CONT. REMOVE SELECT YES>*/ NO>#
:1 LEARNING ID WAIT LEARNING...
:2 DEVICE STATUS SELECT ON>* / OFF>#
:3 DEVICE REMOVE SELECT YES>*/ NO>#
Message
---
OFF
ON
NONE
OFF
---
---
OFF
---