TEFAL Pain Plaisir Manual De Instrucciones página 113

TECHNICAL TROUBLESHOOTING GUIDE
PROBLEMS
The kneading
paddle is stuck in
the pan.
After pressing
on , nothing
happens.
After pressing on
, the motor is on
but no kneading
takes place.
After a delayed
start, the bread
has not risen
enough or nothing
happens.
Burnt smell.
CAUSES - SOLUTIONS
• Let it soak before removing it.
• EO1 is displayed and flashes on the screen, the
appliance beeps: the appliance is too hot. Wait
1 hour between 2 cycles.
• EOO is displayed and flashes on the screen, the
appliance beeps: the appliance is too cold. Wait
for it to reach room temperature.
• HHH or EEE is displayed and flashes on the
screen, the appliance beeps: malfunction.
The machine must be serviced by authorised
personnel.
• A delayed start has been programmed.
• The pan has not been correctly inserted.
• Kneading paddle missing or not installed
properly.
In the two cases cited above, stop the appliance
manually with a long press on the
Start the recipe again from the beginning.
• You forgot to press on
the delayed start programme.
• The yeast has come into contact with salt and/
or water.
• Kneading paddle missing.
• Some of the ingredients have fallen outside
the pan: unplug the appliance, let it cool down,
then clean the inside with a damp sponge and
without any cleaning product.
• The preparation has overflowed: the quantity
of ingredients used is too great, notably liquid.
Follow the proportions given in the recipe.
button.
after programming
EN
113