Identification Of The Machine; Description Of The Machine And Its; Authorized Use; Authorized Use Of The Machine - Fort 180 Serie 2a Instrucciones Para El Uso Y El Mantenimiento

ENGLISH
- in case the damage is attributable to a poor main-
tenance;
- if accessories or applications not delivered or tested
by the Manufacturer were assembled on the ma-
chine;
- in case, further to repairs carried out by the user
without the Manufacturer's permission or in case,
due to the assembly of non-genuine spare parts,
the machine undergoes changes and the damage
is attributable to such changes:
- in case the instructions listed in this manual are
not complied with;
- if some exceptional events should happen.
Moreover, the warranty does not include the dam-
ages resulting form negligence, carelessness, bad use
and misuse of the machine.
WARNING
The tampering of the safety devices on the machine
shall automatically void the warranty and the Manu-
facturer's responsibility.

1.3 IDENTIFICATION OF THE MACHINE

ENGINE. To identify the engine it is necessary to con-
sult the instructions manual of the specific engine,
by comparing the data on the nameplate of the en-
gine Manufacturer.
MACHINE. Each single machine has a serial number
(4 Fig. 8) and a nameplate (D Fig. 1/1A), listing:
- Name and address of the Manufacturer;
- «EC» marking;
- A) Model;
- B) Year of manufacture;
- C) Mass in Kg.
The data written on the nameplate and above all the
serial number identifying the machine, shall be re-
ported on the back of this manual and they shall al-
ways be mentioned in case spare parts and/or serv-
ice are required.
The machine in the standard version is equipped
with:
- Instructions manual for operating and maintaining
the machine
- Instructions manual for operating and maintaining
the engine;
- «EC» declaration of conformity;
Kit including:
- 19 mm spanner
- 13-17 Allen wrench;
- 17-19 Allen wrench;
- 22-24 Allen wrench;
- 4 mm spanner;
- Spanner for sparking plug (only for fuel engines).
- PVC cap, PTO protection.
Both above mentioned manuals are to be considered
an integral part of the machine and they must be care-
fully read before carrying out any intervention or be-
fore using it (even before unpacking it).
1.4 DESCRIPTION OF THE MACHINE AND

AUTHORIZED USE

The Motor hoe model «180» and model «EXPLORER»
is a machine «EC» marked in compliance with the
regulations of the European Union listed in the Direc-
tive 98/37/EC, 89/336/EC, as described in the decla-
ration of conformity attached to each machine.

1.4.1 AUTHORIZED USE OF THE MACHINE

It's an agricultural self-moving machine, equipped
with accessory (cutter unit, sickle unit, etc...) designed
to be controlled by a standing operator and to be used
for different purposes in the field of agriculture and
gardening (milling, ploughing, lawn-mowing,...).
The machine can only work under the supervision and
presence of a person.
The operator shall be skilled and able to read and
understand what is written in this manual.
The operator, moreover, shall use the machine by
keeping in mind the regulations in force for the ac-
cident prevention, the conditions of use and the
specifications of the machine itself.

1.4.2 UNAUTHORIZED USE OF THE MACHINE

- THE MACHINE SHALL NOT BE USED IN ENVIRON-
MENTS WHERE VAPORS OR EXPLOSIVE FLAM-
MABLE GAX MIXTURES MAY DEVELOP.
- IT SHALL NOT BE USED IN CLOSED OR POORLY
VENTILATED ROOMS.
- IT IS ABSOLUTELY FORBIDDEN TO USE THE MA-
CHINE INFLAMMABLE OR EXPLOSIVE ATMOSHPERE
AND/OR WITHIN CLOSED ENVIRONMENTS.
DANGER
DANGER
31