Yamaha 25B Manual Del Propietário página 200

OFF ON START
EMU01513
Emergency Starting Engine
1) Remove the top cowling.
2) Remove the start-in-gear protection
cable from the starter if equipped.
000676
3) Remove the starter/flywheel cover after
removing the bolt(s).
000675
4) Prepare the engine for starting. Refer to
"STARTING ENGINE" for details. Be
sure the engine is in Neutral and that the
lock plate is attached to the engine stop
lanyard switch. The main switch must be
"ON" if equipped.
5) Pull out the choke knob when starting a
cold engine. After the engine starts,
gradually return the choke knob to the
701024
home position as the engine warms up.
6) Insert the knotted end of the emergency
starter rope into the notch in the flywheel
rotor and wind the rope 1 or 2 turns
clockwise.
7) Give a strong pull straight out to crank
and start the engine. Repeat if neces-
sary.
208052
5-7
GB