Storing Outboard Motor - Yamaha 25B Manual Del Propietário

GB
cC
Do not use the tilt support lever/knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor can not be trail-
ered in the down position, use an addi-
tional support device to secure it in the
up position.
EMU00327
Clamp handle mounting model
When transporting or storing the outboard
motor while removed from a boat, fold the
tiller handle and lean the motor on the tiller
handle to keep in a horizontal position.
cC
Keep the power unit higher than the pro-
000678
peller at all times. Otherwise, cooling
water can run into the cylinder, which
could result in damage.
NOTE:
Place a towel or the like under the outboard
motor to protect it from damage.
000731
EMU00329

STORING OUTBOARD MOTOR

When storing your outboard motor for pro-
longed periods of time (2 months or longer),
several important procedures must be per-
formed to prevent expensive damage.
It is advisable to have your outboard ser-
viced by an authorized Yamaha dealer prior
to storage. However, the following proce-
dures can be performed by the owner with a
minimum of tools.
4-4