Corghi ET88 Manual De Uso página 83

the icons
2P.
- On the icons bar, the
balancing program" icon.
- When this icon is selected, a window will appear on the screen.
- Press the and
spokes in the rim to be balanced; the OFF messages indicates that this function
is not required.
- Bring one spoke to 12 o'clock and press
and position of the spokes.
- The imbalance is shown on the monitor, including the two position indicators
for the outside plane. The imbalance value shown for this plane refers to the
indicator in the centreed position condition.
The application of each of the two balancing weights is carried out as described in
the ALU P programs "attaching balancing weights" section.
The HIDDEN WEIGHT function is combined with the SHIFT PLANES function
to allow the use of balancing weights which are multiples of 5 grams in the car
function and 50 grams in the truck function.
Standard ALU programs (ALU 1, 2, 3, 4, 5)
The ALU standard programs take into account the different positions for
the application of the weights (fig.17) and provide correct imbalance values
maintaining unchanged the nominal wheel data input for aluminum rims.
To activate these programs, proceed as follows :
- select the icon
- select one of the icons.
ALU 1 balancing program: provides statistical calculation of the
balancing weights for application on the inner rim disc, as shown in the relative
icon.
ALU 2 balancing program: provides statistical calculation of the
balancing weights for application on the side and on the inner rim disc, as shown
in the icon.
ALU 3 balancing program: provides statistical calculation of the
balancing weights for application, as shown in the icon.
ALU 4 balancing program: provides statistical calculation of the
balancing weights for application, as shown in the icon.
ET 88 operator's manual
ALU programs and then
Hidden weight icon appears instead of the "static
or and and arrow keys to set the number of
ALU programs;
ALU 1P or
; this will memorise the number
ALU
GB
83