Corghi ET88 Manual De Uso página 66

GENERAL CHARACTERISTICS
- Low balancing speed (80 rpm for truck wheels / 120 rpm for car wheels):
• minimises wheel spin times;
• reduces risks due to rotating parts;
• allows energy saving.
- Automatic sensor for distance measurement and for adhesive weight application
in the Alu P programs.
- Automatic wheel stop at end of spin.
- STOP button which stops the machine immediately and locks the wheel shaft.
- Lift with safety handle which prevents tipping over of the wheel and simplifies
handling operations
- Cover with trays to take weights of all types.
- High resolution 15 inch colour monitor: essential support for the execution of the
latest programs
- Graphics allowing operators to learn how to use the machine quickly and easily.
- Simple, intuitive keyboard for data input and program selection.
- Interactive Help function gives explanations about the program in which it is
recalled.
- Possibility of selecting different languages
- Processing unit with several microprocessors (16 bit)
- Resolution:
- Wide selection of programs so that the machine is easy to use immediately
- Imbalance display in grams and ounces
- Imbalance display rounding setting.
- types of balancing available:
• Standard
• Alu / Alu P
• Static
- "Shift plane" program (in Alu P mode) for use of weights in multiples of five grams
in car function and of 50gr in truck function (i.e. the weights available with no
need for intermediate sizes).
- "Hidden weight" program (in ALU P) in order to sub-divide the outer plane
balancing adhesive weights into two equal weights positioned behind the rim
spokes
- Flash OPT programs for rapid optimisation of operating noise levels (for quietest
possible operation).
- Standard OPT programs (available on request).
- General utility programs:
• Calibration
• Personalisation
• Partial and total spin number counter
• Setting of the 3 most widely used programs
•Servicing
• Self-diagnostics
- Three separate working environments, allowing three different operators to work
in parallel with no need to set the data again.
- RPA, automatic wheel positioning in the position where the balancing weight has
66
1 gr (0.1 oz) in car function
10 gr (0.5 oz) in truck function
dynamic on both sides
seven different routines for aluminum rims
on a single side
ET 88 operator's manual