How to move around the page:
The window contains the following:
a. ARROW = select value: use only the
ARROW KEYS
MARKER cursor on the value requiring
modification.
b. BIG ARROW UP = increase value: position
the cursor at the required point and strike this
key to increase the previously set value.
c. BIG ARROW DOWN = decrease value:
same as for previous key but decreases value
instead of increasing it.
d. RETURN = save modifications and exit:
strike this key to store ALL data current on the
COUNTER BAGS page and return to the
previous menu.
e. ESC = exit without modifying: as the
comment implies, striking this key enables
you to exit from the window without saving
anything.
How to modify
Use the ARROW KEYS to position the FIELD
MARKER
cursor
on
modification and then MODIFY the data as
required.
To modify the data:
Use the BIG ARROW KEY pointing UPWARDS to
INCREASE the value and use the BIG ARROW
KEY pointing DOWNWARDS to DECREASE the
value.
to position the FIELD
the
data
requiring
SANTONI S.p.A.
Cómo moverse en la página:
Indicamos a continuación el contenido de esta ventana:
a.
FLECHAS = seleccionar valor: utilizando las
FLECHAS
CAMPO sobre el valor que queremos modificar.
b.
FLECHA GRANDE ABAJO = incrementar valor:
una vez que el cursor ha sido colocado en el punto
que
nos
aumentaremos el valor precedente programado.
c.
FLECHA GRANDE ABAJO = disminuir valor:
como para la tecla precedente pero esta vez en
lugar de aumentar el valor lo disminuirá.
d.
RETURN = guardar los cambios y salir:
pulsando esta tecla memorizaremos TODOS los
datos presentes en la página del CUENTAMEDIAS
CESTAS entonces volveremos al menú anterior.
e.
ESC = salir sin modificar: como dice la frase
misma, con esta tecla podemos salir de la ventana
sin memorizar nada.
Cómo realizar una modificación:
Con la ayuda de las FLECHAS colocaremos el cursor
sobre el dato que debemos modificar entonces
CAMBIAREMOS el valor según nuestras exigencias.
La modificación de este último puede ser realizada :
Utilizando la FLECHA GRANDE dirigida hacia arriba
INCREMENTAREMOS el valor, mientras que con ella
dirigida hacia ABAJO lo DISMINUIREMOS.
175
desplazaremos
el
cursor
interesa
pulsando
REVISION 1.1
MARCA
esta
tecla