horeca FRBE74A Manual De Uso E Instalación página 29

such a person;
• Exposed person: any person that
is found wholly or partly in a dange-
rous zone.
Maintain a minimum distance
from the appliance when oper-
ating in such a way as to avoid
endangering the safety of the opera-
tor in case of unexpected circum-
stances
.
The following are also danger
zones / • All the work areas within
the appliance
• All the areas protected by appro-
priate safety and protection systems
such as safety photocell photoelec-
tric curtains, protective panels, inter-
locked doors, protective casing.
• All the zones within the control
units, electrical cabinets and junc-
tion boxes.
• All the zones around the appliance
in operation when the minimum
safety distances are not being re-
spected.
EQUIPMENT REQUIRED
FOR INSTALLATION /
The authorised technical operator, in
order to perform the installation ope-
rations correctly, must respect the
following requirements:
- 3 and 8 mm screwdriver
- Adjustable pipe wrench
- Gas use tools (hoses, gaskets etc.)
- Electrician's scissors
- Water use tools (hoses, gaskets...)
- 8 mm hex socket wrench
- Gas leak detector
- Tools for electric use (cables, ter-
minal blocks, industrial sockets etc.)
- 8 mm nut driver
- Complete installation set (ele, gas
etc.)
In addition to the tools listed,
an equipment lifting device is
required.
must comply with all the regulations
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
This equipment
- 7 -
relating to lifting equipment.
INDICATION ON RESIDUAL
RISK / Even though the rules for
"good manufacturing practice" and
the provisions of law which regulate
manufacturing and marketing of the
product have been implemented,
"residual risks" still remain which,
due to the very nature of the appli-
ance, it has not been possible to
eliminate. These risks include:
RESIDUAL
ELECTROCUTION / This ri-
sks remains when intervening on live
electrical and/or electronic devices.
RESIDUAL RISK OF BUR-
NING / This risks remains
when unintentionally coming
into contact with materials at high
temperatures.
RESIDUAL RISK OF BURNS
DUE TO LEAKING OF MA-
TERIAL /
This risks remains when unintentio-
nally coming into contact with ma-
terials at high temperatures. Con-
tainers that are too full of liquids or
solids that during warming change
morphology (changing from a solid
to a liquid), can, if used incorrect-
ly, cause burns. During operations,
the containers used must be placed
on easily visible levels.
RESIDUAL RISK OF CRU-
SHING LIMBS / This risk exi-
sts where there is accidental
contact between the parts during
positioning, transportation, storage
and assembly.
RESIDUAL RISK OF EXPLO-
SIONS / This risk remains
when:
• there is smell of gas in the room;
• appliance used in an atmosphere
2.
EN
RISK OF