Types
of needle
plates
C) Standard (for normal sewing)
Stamp on reverse side of the plate: "S"
(_) Rolled hemming {for roiled hemming, picot edging and
narrow hemming)
Stamp on reverse side of the plate: "R"
:J: Select the needle plate for your sewing need,
'_: Your oveflock is shipped with the standard needle
plate in place
For your safety:
When you change the needle plate, make sure that the
machine is disconnected
from the power supply,
Changing
a needle
plate
(_ Needle plate set screw
(_) Loosen
(_) Tighten
Turn the handwheel
toward you until the needle comes
above the needle plate, Then remove the presser foot.
Open the side and looper covers (See page 16)_
Set the upper knife to down position (See page 62).
Remove the needle plate set screw C), and lift the needle
plate.
Attached the needle plate you require with the needle plate
set screw.
Bring the upper knife to up position (See page 62).
Close the looper and side covers,
Attach the presser foot.
64
