Threading the needle on the left (continued)
C. (_) Left needle thread tension dial
4_) Thread take-up lever thread guide
Insert the thread between tension discs from the righL
Then pull both sides of thread.
Turn the handwheel toward you to bring needle bar to
its highest position, then pass the thread through
thread take-up lever thread guide
D. (_) Needle thread guide
(_ Needle bar thread guide
Pass the thread through needle thread guide sliding
the thread from right to left
Pass through needle bar thread guide from left to right
Thread the left needle from the front to the back and
pull the thread about 10 cm (4 ") from the eye of the
needle to the back under foot
NOTE:
Needle may be easier to thread if you remove
presser foot (See page 58) and lower the upper
knife (See page 62).
• Gently pull all four thread ends towards back of machine.
• Replace presser foot (See page 58).
• Run threads under presser foot
• Return upper knife to up position (See page 62).
• Close side and looper covers
• Turn handwheel toward you to chain off three or
four stitches.
©
©
=
!,
Y
\
36
