o Threading the lower looper (continued)
D, (_ Lower looper thread tension dial
(_) Lower looper thread guide (1)
Insert the thread between tension discs from the righL
Then pull both sides of the thread firmly between
tension discs.
Pass the thread through lower looper thread guide (1)
E (_ Lower looper thread guide (2)
(Z) Looper thread take-up lever (lower)
(&) Lower looper thread guide (3)
(&) Lower looper thread guide (4)
Pass the thread through lower looper thread guide (2).
Pass the thread through the looper thread take-up
lever (lower).
Pass the thread through lower looper thread guides (3)
and (4).
E @) Looper threader
(_) Lower looper thread guide (5)
@ Thread
Turn the handwheel toward you until the
lower looper comes to the right, and pass a looper
threader through hole on lower looper thread
guide (5).
Hook the end of thread on the looper threader,
G 1@ Looper threader
1@ Lower looper
1@ Tweezers
Pull the looper threader to pass the thread through the
hole of lower looper thread guide (5).
Remove the thread from the looper threader, and draw
the thread through the hole on lower looper to the back
10 cm (4") or more with a pair of tweezers,
©
®
®
©
'_' Make sure that the thread is between the tension
discs,
C) Thread
(_ Tension discs
How to thread woolly nylon/polyester
thread.
(_ Lower looper
(_ Ordinary thread
_) Woolly nylon/polyester thread
=_'Shown right is one of the easiest ways to pass woolly
nylon/polyester
thread through the lower looper,
'
Use the same method for the upper looper.
24
