• Threading the needle on the right (continued)
C. (_ Right needle thread tension dial
Insert the thread between tension discs from the righL
Then pull both sides of thread.
D. (_
Right needle thread guide
(_) Thread take-up lever thread guide
Turn the handwheel toward you to bring needle bar to
its highest position, then pass the thread through right
needle thread guide and thread take-up lever thread
guide.
E. (_) Needle thread guide
0
Needle bar thread guide
Pass the thread through needle thread guide sliding
the thread from left to right
Pass through needle bar thread guide from left to righL
Thread the right needle from the front to the back and
pull the thread about 10 cm (4 ") from the eye of the
needle to the back under the foot_
NOTE:
Needle may be easier to thread if you remove
presser foot (See page 58) and lower the upper
knife (See page 62).
©
©
®
U
32
