• Threading
the upper Iowper (continued)
D. (_) Upper looper thread tension dial
Upper looper thread guide (1)
Insert the thread between tension discs from the right.
Then pul! both sides of thread.
Pass the thread through upper looper thread guide (1)
E
(_) Upper looper thread guide (2)
(_) Looper thread take-up lever (upper)
Pass the thread through upper looper thread guide (2)
Turn the handwheel toward you until the upper looper
comes to the middle position of its travel, then pass the
thread through the looper thread take-up lever (upper).
E (_) Upper looper thread guide (3)
(_) Upper looper
q@ Looper threader
Pass the thread through upper looper thread guide (3),
Pass a looper threader through the hole on the upper
looper,
Then hook the end of thread on the looper threader,
Pull out the threader to pass the thread through the
hole. Remove the thread from the looper threader, and
draw the free end of thread 10 cm (4") or more.
©
®
®
\
28
