How To Replace Sharpening Stone - Nogueira FTN-1000 G3 Manua De Instrucciones

6.10 - How to replace sharpening stone

Replace the sharpener stone when you find
that it has lost its sharpening ability.
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Loosen the handle (A) and remove cover
1.
(B).
Remove the 3 nuts (D);
2.
Remove the sharpener from the machine;
3.
Remove the pin (E) and the bolt (F);
4.
Remove the handle (G) and the guide (H);
5.
Remove the shaft with the sharpening
6.
stone (J) from the sharpener body (K);
Remove the 3 bolts (L);
7.
Install a new sharpening stone (P) on the
8.
sharpener.
Reassemble the sharpener in the machine
9.
following the reverse order of disassembly
described above.
Always use the original Nogueira stones.
Inadequate stone can break during
sharpening and cause an accident with
personal injury and in the machine.
The use of PPE (suitable gloves and safety
glasses) is mandatory during the above
procedure.
ATTENTION!
Instructions Manual
6. Maintenance
D
B
A
G
E
K
J
P
F
H
L
85