1- Place The Outlet Chute In Working Position - Nogueira FTN-1000 G3 Manua De Instrucciones

4.8.1- Place the outlet chute in working position

To make transportation easier, the machine is
supplied with the outlet chute in the transport
position (lowered). To place it in the working
position, proceed as follows:
CAUTION!
Never carry the machine with the chute
lifted. Any contact with the power grid
can result in an electric shock and/or
electrocution accident.
First, remove the wing nut (A) to unlock
1.
the chute;
Carefully raise the chute;
2.
Fix the chute in the raised position by
3.
pulling the lever fully down (B).
It is important to lock the lever (B) with
enough pressure to prevent loosening and
dropping of the chute during operation or
transportation.
If the locking pressure is insufficient, increase
the pressure by tightening the nut (B).
Outlet chute in working position
A
B
B
Instructions Manual
4. Preparation
43