Nogueira FTN-1000 G3 Manua De Instrucciones página 195

For your safety, replace the cover (B) before
4.
starting to sharpen.
Loosen the handle (D) and remove cover
5.
(E).
Turn on the PTO in working speed (540
6.
rpm).
Carefully turn the handle (F) clockwise
7.
until the sharpener stone touches the
knives.
Press the handle to press the stone
8.
against the knives. Keep the pressure for,
approximately, 10 seconds.
After sharpening, move the stone away
9.
from the knives by turning the handle
counterclockwise.
Turn off the power take off.
10.
Wait a few moments until the rotor
11.
stops rotation and inspect the knives. If
necessary, repeat sharpening.
Replace the cover (E).
12.
Retighten the handle (D) until it locks the
13.
cover (E).
CAUTION!
Do not attempt to sharpen the knives with
the machine cover open. The contact with
the rotor in motion may cause an accident
with very serious personal injury.
Wear goggles while sharpening. Sparks
are detached from the knives and can
cause serious eye damage.
E
Instructions Manual
6. Maintenance
B
SHARPEN
D
SHARPENING
STONE
F
F
83