Safety Pins; 1-How To Replace The Safety Pin - Nogueira FTN-1000 G3 Manua De Instrucciones

6.11 - Safety Pins

The harvester is equipped with two safety pins
located on the shafts of the cutting gears.
The function of these pins is to protect the
harvester in case of entry of any foreign body
(pieces of iron, stone, wood, etc.) or some
feeding overload during the operation.
When one of the safety pins breaks, the
feeding drums stop working and the machine
stops immediately.
If the safety pin is broken, replace it with
another of the same specification.
The use of improper safety pins
compromises the operation of the
safety system, which may result in
damage to the machine. Do not
replace the safety pin with piece
of iron, nail, bolt, etc. Use only the
original Nogueira pin.
Eliminate the cause of pin breakage
before turning the machine on again.
6.11.1- How to replace the safety pin
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Remove the 3 bolts (D) and the cover (E);
1.
Loosen the bolt (F) and loosen the chain
2.
(G);
Remove the chain (G);
3.
Remove the bolt (H) and the sprocket
4.
wheel (J);
Remove the bolt (L) and the sprocket
5.
wheel (M);
Remove the two gears (L);
6.
J
G
Instructions Manual
6. Maintenance
D
E
H
F
K
L
87