Theoretical Length Of Cut - Nogueira FTN-1000 G3 Manua De Instrucciones

4.9 - Theoretical Length of Cut

The FTN-1000 G3 provides a variety of
chopping sizes, ranging from a minimum of
2.0 mm to a maximum of 36 mm in length.
The table below shows all possible chop sizes,
the gear pairs used, and the number of knives
needed to obtain these sizes.
CHOPPING LENGTH
How to change the chopped size:
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Remove the 3 bolts (A) and the cover (B);
1.
Loosen the tensioner bolt (C);
2.
Loosen and remove the chain (D);
3.
Remove the bolt (E) and the sprocket
4.
wheel (F);
Note in the table above which pair of gears
5.
should be mounted to obtain the desired
chop size;
CHOPPING
Instructions Manual
CHOPPING
CHANGE
B
D
C
E
F
4. Preparation
A
45