Hopper Assembly; Operating Position - Nogueira NSG-9200 Manual De Instrucciones

Hopper assembly

The hopper is supplied disassembled from the
machine. The following instructions show the
correct assembly procedures.
1- Fit the hopper inside the filling box.
2- Assemble the 3 strips using the fastening
screws, inside the hopper.
3- Fasten the hopper using the fasteners.

Operating position

The NSG-9200
assembled in the transport position (fig,07). So,
to place it in the operating position (fig.08), it will
be necessary to install the two wheels and the
head bar. The following instructions show how to
correctly perform this operation.
NOTE:
from the tractor.
fig.04
fig.07
fig.05
fig.08
fig.06
NSG-9200
is shipped from the factory
The machine must be disconnected
13