Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.1.1- Outlet chute in working position
To make transportation easier, the machine is
supplied with the outlet chute in the transport
position (lowered). To place it in the working
position, proceed as follows:
CAUTION!
Never carry the machine with the chute
lifted. Any contact with the power grid
can result in an electric shock and/or
electrocution accident.
First, remove the wing nut (A) to unlock the
1.
chute;
Carefully raise the chute;
2.
Fix the chute in the raised position by pulling
3.
up the lever (B).
It is important to lock the lever (B) with enough
pressure to prevent loosening and dropping of the
chute during operation or transportation.
If the locking pressure is insufficient, loosen the
locknut (C) and increase the pressure by tightening
the nut (D). After adjusting, retighten the locknut
(C).
Outlet chute in working position
A
Instructions Manual
4. Preparation
B
D
C
43
Capítulos
Tabla de contenido
