Wheels And Tyres - Gallignani GA FB 12 Manual Del Operador

Driving wheels
Driving wheels
Driving wheels
Pick- -up gauge wheels
8- -1
SECTION 8
SPECIFICATIONS AND DATA
NOTE: the following specifications are just approximate and could
vary slightly depending on the baler types and/or the harvesting
conditions.

WHEELS AND TYRES

CAUTION: the tyres specified by the manufacturer are
the only approved ones. If non- -genuine tyres are used or
fitted, they must have the same size and strength of
genuine tyres (for diagonal tyres, see the ply number "PR", for
radial tyres, see the load capacity - - e.g. 146 D). The
recommended inflation pressure must always be complied with.
Use only genuine rims for the recommended tyres. Only these tyre
and rim size combinations have been type- -approved according to
the machine weight, width and speed limits on road.
The rims must be fitted to comply with the max. allowed width on
public roads, in compliance with local regulations.
WHEEL NUT TIGHTENING TORQUE
Wheel nuts
WHEEL INFLATION PRESSURES
10.0/75--15.3
11.5/80--15.3
15.0/55--17
15x6.00--6
(All models)
300±10% Nm -- (31±10% kgm)
Dimensions
--8 P. R.
--10 P. R.
--10 P. R.
--6 P. R.
Pressure
3,1 bar
3,4 bar
2,6 bar
2,9 bar