Maintenance Intervals - Dräger WorkMaster Industry Instrucciones De Uso

Troubleshooting
Error
Closure system jammed
Chemical protective suit leaks
Chemical protective suit is not ventilated Valve sticking
Suit labelling comes off
Dents in the suit

Maintenance Intervals

1)
Part Operation
Chemical Visual inspection
protective suit
Cleaning
Disinfecting
Checking for
tightness
Suit valves Testing
Replacing the valve
discs
1) See specific Instructions for Use of the full face mask and ventilation units.
2) If stored in vehicles.
3) Applies to new chemical protective suits.
4) Applies to reserve stock.
Cause
Foreign object in zip fastener
Excess friction
Closure system not closed
Suit material damaged
Protective boots or gloves defective, or
bonds leaky
Dirty or defective valve disc or seat
Seam leaky
Machine cleaning or intensive contact
with chemicals
Fabric creasing due to storage in folded
condition or repeated use
X X
X
X
3)
X X X
X
Remedy
Clean zip fastener.
Grease zip fastener with grease pen.
Close the closure system completely.
Repair with suit repair kit.
Have the face cuff replaced by Dräger.
Replace or seal and check for leaks
again.
Clean or replace and check for leaks
again.
Replace or seal and check for leaks
again.
Clean or replace and check for leaks
again.
None.
When the suit is cleaned or comes in
contact with certain chemicals, a separa-
tion cannot be avoided. However, the
function of the chemical protective suit
remains unchanged.
None.
However, the function of the chemical
protective suit remains unchanged.
Intervals
2)
X X
X
*)
X X
X
X
4)
X
31