Taurus MY BREAD Manual De Instrucciones página 29

POINTS:
- The ingredients should be put into the pan
exactly in order; a hole should be doug into the
flour, no too much big or deep to avoid touching
water and salt earlier during the operation of
delayed bread-making.
- The above dried yeast is Angle Brand that
different brands' yeast is required in different
application amount. And the amount of yeast
depends on the change of room temperature
with the normal being 20º, that's adding dried
yeast properly if the room temperature is over-
high and vice verse.
- The requirement for flour is the pure-white
quality, no sand, and no musty taste with being
sleved by 100 meshes.
- No use of metal tools (slice, knife or fork)
to clean the pan in order to protect the pan
carefully.
- The hole located in the middle of stirring paddle
should be cleaned, dropped little oil and put
back to the pan to prevent from sticking the
stirring paddle.
- The power should be cut before you rub the
inner bread maker with wet cloth or sponge.
- Do not keep the pan in the water for a long time
which will result in the bad operation of rotation
axis. If the stirring paddle is stuck into the pan,
you can pour some boiled water to drench
it, which will make it easy to take out it after
several minutes.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended; take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
This appliance complies with Directive 2014/35/
EU on Low Voltage, Directive 2014/30/EU on
Electromagnetic Compatibility, Directive 2011/65/
EU on the restrictions of the use of certain
hazardous substances in electrical and elec-
tronic equipment and Directive 2009/125/EC on
the ecodesign requirements for energy-related
products.