Tabla de contenido
EN
G
Also make sure that the new fitting situation complies with
the compulsory bumper bar regulations. See Fig. 3.6 for
an example of the important fitting dimensions.
C
Fitting height = Height of centre lift arm to the top
of the loading floor of the vehicle
CO
Height of centre lift arm to the ground
J Max. Max. chassis height
K
Floor height of the vehicle
M
Required overhang
MR
Overhang required to the end of the sliding tubes
For SIDE-MOUNTING on truck chassis: when changing
the fitting height C, ensure that the drill holes in the
mounting brackets for the aluminium sliding tubes still fall
within the chassis [See Fig. 3.7].
Refer to the TECHNICAL SUMMARY of the
HTL for detail on the correlation between the
arm length, the fitting height and the required
overhang [See Fig. 3.8].
For any given platform depth V, the required overhang M
can be reduced by 100 mm with the option S245.S on the
platform [See Fig. 3.9].
DHOLLANDIA
3.6
EJ.
3.7
3.8
EJ.
[DH-SMR80]
Longitud brazo, profundidad plato y medida VOLADIZO
VOLADIZO M en función de la longitud del brazo y la profundidad del plato (1)
BRAZO 820
BRAZO 880
Prof. Plato V
M
M
V = 1500 (2)
1640
1700
V = 1700 (2)
1740
1800
21
3.9
ESTÁNDAR
S245.S
BRAZO 940 BRAZO 1000 BRAZO 1100 Opción S245 Mín. MR
M
M
M
1760
1820
1920
1860
1920
2020
!
M (3)
M (4)
-100
+95
-100
+95
Tabla de contenido
